PUMP
SYSTEMS
B-Dry System Western Ohio - Pump Options
We normally use pump systems that range from 1/3 to 3/4 horsepower, with pumping capacities of up to 3,700 GPH on an 8' lift. Our pumps are installed up to city code and in most cases we include the electrical circuit for the installation.Pump Specs:
Primary Motor:
The Blue Angel Primary F33CIS is our Professional Grade ALL Cast Iron Submersible Sump Pump. This 1/3 HP pump is Ultra Quiet, tested to 1,000,000 Cycles, and designed to last!
FEATURES / BENEFITS
- Corrosion Resistant Construction with Top Suction Design to Minimize Clogging
- Assembled in the US with foreign and domestic parts
- Tested to 1 million cycles*
- Durable Epoxy-Coated Cast Iron Housing/Volute
- Top Suction Design Eliminates Air Locks and Minimizes Clogging from Debris in the Bottom of the Sump Pit
- Reliable Thermoplastic Impeller for Maximum Water Flow
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- For Use In 11 in. Diameter or Larger Sump Basins
- 8 ft. SJTW Power Cord
Primary Motor & Backup Combo:
A complete primary and backup sump pump solution. Includes Primary Pump, backup pump, system controller, float switches two check valves, connectors and battery case.
Pre-assembled and ready for installation.
- Stainless Steel Upper and Lower Float Guard and Float Guide
- Cast Iron Pump Housing/Base with Top Suction
- Intake to Filter Debris and Minimize Clogging
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
- For Use In 14 in. Diameter or Larger Sump Basins 8 ft. SJTW Power Cord
- 3 Year Manufacture Warranty
75 AMP Battery included with initial Combo Kit installation
Battery Backup Unit:
The F12V is our ALL Cast Iron “Smart Charging” Battery Back Up Pump that will bring your battery back to full charge. This Battery Back Up provides 6 hours of continuous pumping power and is a perfect addition to to any sump system.
- Assembled in the US with foreign and domestic parts
- Fully Submersible Back Up Pump, for An Easy Addition To Any Sump System
- ALL Cast Iron Construction for Long Life in Tough Sump Applications
- Corrosion-Resistant Thermoplastic Impeller for Maximum Water Flow
- Protective Battery Case Included with LED Display and Audible Alarm to Let Homeowner Know if There’s a Problem
- 1-1/2 in. NPT Discharge for Easy Installation and Compliance with Building Codes
75 AMP Battery included with initial Battery Back-up installation
Most municipalities that require a permit also require a sump pump. The pump is normally discharged to the city storm sewer or a drywell system that we install. There are a few circumstances that require an alternative connection, such as trenching a line to a culvert drain, natural watershed....ect.
Most of our basement waterproofing installations require a sump pump as well. We only install the 3/4 horse Pitboss pumps and do not recommend any pump smaller than a 1/3 horse. The 3/4 horsepower PitBoss pump is capable of discharging over 4,000 gallons of water per hour on a 10 foot lift.
The location of the sump pump crock is usually in an inconspicuous corner of the home, normally near utilities, and connected to the downspout leader (storm sewer). This allows the water around the foundation to exit the home quickly.
Pump installations require an electrical circuit to be installed. We normally install the electrical outlet, but in some circumstances the customer is responsible to supply a 20 amp circuit for power to the pump. Please ask your basement waterproofing consultant for more details if required.
